|
 Recommended books (please see our book page for more information): |
 |
The Narrowboat Builder's Book by Graham Booth
Starting with the purchase of a shell, it takes you through how to find an engine, the tools needed for DIY fitting out, insulation, lining out, waterheating, electrics and required safety standards. |
 |
Narrowboat Planning by Graham Booth
Packed with ideas for maximising the available space. Photographs help you visualise how different solutions would look. |
| |
See more.. |
|
see more... |
|
| Solid Fuel Stoves and Chimneys |
 |
| Morso Squirrel (1410) |
 |
| Dimensions: |
546mm high, 388mm wide, 415mm deep |
|
| Flue Dimensions : |
5" top or rear outlet |
| Output: |
4kw (max) |
| Features: |
Multifuel stove, comes complete with glove and operational tool. |
|
| Price: |
| Morso 1410 stove |
See our
NEW WEBSITE
for latest deals! |
Morso 1410 stove
(with back boiler) |
| Morso 1430 "Cleanheat" Stove |
Morso 1430 "Cleanheat" Stove
(with back boiler) |
| Please go to our new website for the latest products, prices and offers |
|
|
|
|
|
| Morso 1410 is a stock item, other models to order |
|
|
|
|
 |
| Becton Bunny (multifuel stove) |
| Dimensions: |
400mm wide, 510mm high, 340mm deep |
|
| Flue Dimensions: |
Flue diameter 4" |
| Output: |
5Kw |
| Features: |
Burns wood, peat and solid fuel; Ash door safety interlock; multifuel grate; optional back boiler for hot water |
|
| Price: |
Please go to our new website for the latest products, prices and offers
|
|
|
|
|
 |
| Valor "Arden" Multifuel stove |
| Dimensions: |
540mm High, 405mm Wide, 362mm Deep |
|
| Flue Dimensions: |
4" (top or rear outlet) |
| Output: |
1-5KW (approx) |
| Features: |
Optional back boiler, multifuel capability,
Airwash system to minimise cleaning, fabricated
steel construction. |
|
| Price: |
Please go to our new website for the latest products, prices and offers |
|
|
|
|
 |
Valor Willow (multifuel stove)  |
| Dimensions: |
355mm wide, 458mm high, 350mm deep |
|
| Flue Dimensions: |
Flue diameter 4" (102mm) |
| Output: |
4.5Kw |
| Features: |
Burns wood, peat and solid fuel; multifuel grate; rear or top flue outlet; fabricated steel construction |
|
| Price: |
Please go to our new website for the latest products, prices and offers
|
|
|
|
|
 |
| EcoFan (800 series) |
| Dimensions: |
Approx 9" High, 5.5" wide, Blade diameter 8" |
|
| Operation: |
Simply sit it on top of your hot stove and the fan will
begin to circulate the air around the room / cabin |
| Features: |
All metal construction, 2 blade fan, carry handle |
|
| Price: |
Please go to our new website for the latest products, prices and offers |
|
|
|
|
 |
| EcoFan (802 series) |
| Dimensions: |
Approx 10" High, 6" wide, Blade diameter 8.5" |
|
| Operation: |
Simply sit it on top of your hot stove and the fan will
begin to circulate the air around the room / cabin |
| Features: |
All metal construction, 3 blade fan, carry handle |
|
| Price: |
Please go to our new website for the latest products, prices and offers |
|
|
|
|
 |
| 4.75" Stainless steel chimneys |
| We stock the following sizes: |
| 4.75" diameter x 12" height (black painted with brass band) |
| 4.75" diameter x 18" height (black painted with brass band) |
| 4.75" diameter x 24 " height (black painted with brass band) |
| 4.75" inner skin (black painted mild steel) |
| 4.75" cast collar |
|
|
|
 |
| 6.0" Stainless steel chimneys |
| We stock the following sizes: |
| 6.0" diameter x 12" height (black painted with brass band) |
| 6.0" diameter x 18" height (black painted with brass band) |
| 6.0" inner skin (black painted mild steel) |
| 6.0" cast collar |
|
|
|
|
| Galvanized chimneys |
| We stock the following sizes: |
| 4.75" diameter x 12" height (black painted with brass band) |
| 4.75" diameter x 18" height (black painted with brass band) |
| 6" diameter x 12" height (matt black painted with brass band) |
| 6" diameter x 18" height (matt black painted with brass band) |
| 6" diameter x 18" height double skinned (matt black painted with brass band) |
|
|
|
|
 |
| Solid Fuel Stove Accessories |
| Brass inner flue trim (4.5" inner diameter, 7" outer diameter) |
| Brass titch pipe (3.5" diameter x 6.5" excluding handle / loop) |
| Black rain hat cowl (9.5" diameter, fits both 4.75" and 6" chimneys) |
| Brass rain hat cowl (9.5" diameter, fits both 4.75" and 6" chimneys) |
| Hearts and Diamonds chain (20") |
| Flue pipe reducing socket (for helping adapt between stoves and flues) |
| Flue pipe (4" diameter by 5' length) |
|
|
|
 |
| Solid Fuel Stove Consumables |
| Anthracite stove paint (Aerosol paint 340g) |
| High temperature paint (Black, 250ml) |
| 1m glass rope lagging |
| High temperature rope (for stove doors) |
| High temperature adhesive (30ml) |
| Fire cement |
|
|
|
|
 Back to Top |
| Kabola Diesel Stoves & Boilers |
 |
At Ely boat chandlers we can offer the full range of products from Kuranda.
We can sell product with all the help and advice you need to ensure the right product for your needs, or we can offer a full fitment service.
If you are interested in a diesel heating or cooking product then please give us a call and we will be more than happy to talk through the options and specifications with you. |
| |
|
|
|
| Kabola "Old Dutch" Stove |
| Dimensions: |
580mm High, 280mm Wide, 450mm Deep |
|
| Flue : |
This stove has a rear flue outlet, and can be positioned with an angled or shaped flue.
But any bends in the flue pipe will detract from the stated KW capacity |
| Services Needed: |
Diesel fuel (supplied with a small head of pressure) |
| Quality Features: |
Gold plating of trim.
Flame failure cut-out
Over-heat cut-out (optional)
Over boil cut-out (for back bloiler models) |
|
| Stove Capacity: |
Stove capacity 1.46kw minimum, 4.6kw maximum
Back boiler capcity: 0.3kw mimimum, 1.7kw maximum
(both the capacities quoted above are flue length dependent)
|
|
| Kabola Ancillaries needed for fitment: |
Thin walled flue pipe (80mm dia)
Kabola twin walled chimney
Kabola deck fitting / chimney collar
(click here to see picture)
Please note that other ancillaries needed are dependent upon each unique fitment. A full kit can be put together to ideally suit your application needs. |
|
|
|
|
|
| Kabola "2D" Stove |
| Dimensions: |
580mm High, 450mm Wide, 350mm Deep |
|
| Flue : |
This stove has a top flue outlet, and can be positioned with an angled or shaped flue.
But any bends in the flue pipe will detract from the stated KW capacity. |
| Services Needed: |
Diesel fuel (supplied with a small head of pressure) |
| Quality Features: |
Flame failure cut-out
Over-heat cut-out (optional)
Over boil cut-out (for back boiler models) |
|
| Stove Capacity: |
Stove capacity 1.46kw minimum, 4.6kw maximum
Back boiler capcity: 0.5kw mimimum, 2.5kw maximum
(both the capacities quoted above are flue length dependent)
|
|
| Kabola Ancillaries needed for fitment: |
Thin walled flue pipe (100mm dia)
Kabola twin walled chimney
Kabola deck fitting / chimney collar
(click here to see picture)
Please note that other ancillaries needed are dependent upon each unique fitment. A full kit can be put together to ideally suit your application needs. |
|
|
|
|
|
| Kabola "E3" Boiler |
| Dimensions: |
515mm High (to top of housing), 340mm Wide, 530mm Deep |
|
| Flue : |
This boiler has a top flue outlet, but the flue CANNOT be angled (more than a few degrees) or have bends in it, therefore it needs to be positioned with a vertical flue. |
| Services Needed: |
Diesel fuel (supplied with a small head of pressure)
Radiators and calorifiers need to be correctly specified to suit the unit (we would obviously ensure that the unit is correct for your existing set-up or help specify new equipment. |
| Quality Features: |
Flame failure cut-out
Over-heat cut-out (optional)
Over boil cut-out (for back bloiler models) |
|
| Stove Capacity: |
Boiler Capacity: Max 3.4kw
(the capacity quoted above is flue length dependent)
|
|
| Kabola Ancillaries needed for fitment: |
Thin walled, twin walled flue pipe (80mm dia)
Kabola twin walled chimney
Kabola deck fitting / chimney collar
(click here to see picture)
Please note that other ancillaries needed are dependant upon each unique fitment. A full kit can be put together to ideally suit you application needs. |
|
|
|
|
|
|
|
|
|
| Back to Top |
| Brassware and Lights |
|
 |
| Brass Mushrooms and Liners |
| If you have specific size requirements please call for relevant dimensions |
| |
|
|
|
 |
| 12V Brass Navigation Lights (also available in chrome) |
| Full set available: Port, Starboard, Stern, Masthead |
| (replacement lenses available) |
| Please ring for specific size measurements |
|
|
|
 |
| 12V Brass Navigation Lights (also available in chrome) |
| Port, Starboard and Stern available |
| (replacement lenses available) |
|
|
|
 |
| 12V Brass Navigation Lights (also available in chrome) |
| Port and Starboard available |
|
|
|
 |
| 12V Brass Headlights |
| Large headlight: |
8" diameter, 3.5" depth |
|
|
| Small headlight: |
4.5" diameter, 2.5" depth |
|
| Both lights have a simple swivel mounting ideal for hanging from the front roof overhang! |
|
|
|
 |
| Brass Fairleads (sold as a pair): 110mm, 150mm, 205mm |
| Brass Horn Cleats: 50mm, 75mm, 100mm |
|
| The above dimensions are the length of the item |
| Brass Deck Eyes: Dia90mm, cut-out 60mm dia x 30mm deep |
|
|
|
 |
| Brass Deck Fillers (also available in chrome) |
| Water, Diesel, Pumpout |
| (Spare lids available) |
| Please call for specific dimensions |
|
|
|
|
| Back to Top |
| Narrowboat Fenders |
|
|
|
 |
| Rope Fenders |
| We stock black polyprop rope fenders, but can obtain natural rope fenders in a couple of working days. |
- Side fenders
- Button fenders
- Extended button fender
- Vee bow fender
- Tipcat bow fender
|
|
 |
|
Please go to our new website for the latest products, prices and offers |
|
|
|
|
 |
| Plastic Fenders |
- Flat black canal fenders
- Wheel type fender
- Long thin / tubular fender
- Set of 4 tubular fenders with attached (white) ropes
|
|
|
Please go to our new website for the latest products, prices and offers |
|
|
|
|
| Back to Top |
| Painting your Narrowboat |
|
We stock the full range of International primers and undercoats, the full range of Brightside and Toplac Enamel paints and can obtain the full range of 2-pack Perfection paints to order. We also stock Intertuf bottom blacking for below the waterline. (view stock)
|
|
| |
|
We stock certain colours of the popular Rylard enamels range (and undercoat), particularly the greens. Please give us a call to see what we have in stock. If we don't have the colour you are after we would be happy to get it in for you within a couple of working days. (view stock)
|
|
| |
|
|
|
| Back to Top |
|
| |
|
|
