|
| Water Pumps |
At Ely Boat Chandlers we hold a wide range of water pumps, hose fittings and all you need to install or maintain a water system.
If you have specific requirements other than what you see below, give us a call to see if weve got it in stock, and if not we'll be happy to source it for you if we can!
|
|
|
|
|
 |
| 12v Shurflo Water Pump (7 Litres/min, 15psi) |
| Suitable for running: |
2 sinks (through a water heater) |
| Type of pump: |
Pressurised water system |
| Rating: |
7 litres per minute at 15psi |
| Connections: |
1/2" hosetails |
| Accessories included: |
1/2" straight hosetail, 1/2" elbow hosetail |
(please note that we stock the filters, but they are sold separately) |
|
 |
|
| 12v Shurflo Water Pump (10.6 Litres/min, 20psi) |
| Suitable for running: |
2 sinks, shower (through a water heater) |
| Type of pump: |
Pressurised water system |
| Rating: |
10.6 litres per minute at 20psi |
| Connections: |
1/2" hosetails |
| Accessories included: |
1/2" straight hosetail, 1/2" elbow hosetail |
(please note that we stock the filters, but they are sold separately) |
|
|
|
| 12v Shurflo Water Pump (10.6 Litres/min, 30psi) |
| Suitable for running: |
2 sinks, shower (through a water heater), long pipe runs |
| Type of pump: |
Pressurised water system |
| Rating: |
10.6 litres per minute at 30psi |
| Connections: |
1/2" hosetails |
| Accessories included: |
1/2" straight hosetail, 1/2" elbow hosetail |
(please note that we stock the filters, but they are sold separately) |
|
|
|
| 12v Shurflo Water Pump (12.5 Litres/min, 30psi) |
| Suitable for running: |
2 sinks, shower (through a water heater) plus... |
| Type of pump: |
Pressurised water system |
| Rating: |
12.5 litres per minute at 30psi |
| Connections: |
1/2" hosetails |
| Accessories included: |
1/2" straight hosetail, 1/2" elbow hosetail |
(please note that we stock the filters, but they are sold separately) |
|
|
 |
12v Jabsco 2.9 Par-Max water pump
This pump has a pulsation eliminator that negates the need for an accumulator) |
Suitable for running: |
2 sinks, shower (through a water heater) |
Type of pump: |
Pressurised water system. Can run dry |
Rating: |
11 litres per minute at 25psi |
Connections: |
1/2" hosetails |
Accessories included: |
1/2" straight hosetails |
| |
|
|
|
|
|
|
 |
| 12v Aquaflow Water Pump (18 Litres/min, 15psi) |
| Suitable for running: |
2 sinks, small shower (through a water heater) |
| Type of pump: |
Switched (from taps) water system |
| Rating: |
18 litres per minute at 15psi |
| Connections: |
1/2" hosetails |
|
|
|
 |
| 12v Aquaflow "Submersible" Water Pump (18 Litres/min, 15psi) |
| Suitable for running: |
2 sinks, small shower (through a water heater) |
| Type of pump: |
Switched (from taps) water system |
| Rating: |
18 litres per minute at 15psi |
| Connections: |
1/2" hosetails (crocodile clips onto batteries) |
|
This unit can be fully submersed into a water carrier to pump water, or plumbed in-line by simply removing the bottom end cap (by hand, no tools required) |
|
|
 |
| 12v LVM "Niagara" Budget Submersible and in-line pump |
| Suitable for running: |
2 sinks |
| Type of pump: |
Switched (from taps) water system |
| Rating: |
13 litres per minute at 14psi |
| Connections: |
1/2" hosetails (crocodile clips onto batteries) |
|
This unit can be fully submersed into a water carrier to pump water, or plumbed in-line by simply removing the bottom end cap (by hand, no tools required) |
|
|
| |
 Back to Top |
|
| Water System Accumulators |
|
|
An accumulator is a vessel that contains a pressurised gas filled bladder. when plumbed into a water system it acts as a "pressurised reservoir". This will alleviate pump "pulsing" from a dripping tap, or very short bursts of a tap being opened. |
 |
| 2 Litre Accumulator |
| Dimensions: |
230mm high, 125mm diameter (weight 1.1kg) |
|
| Max working pressure : |
4 bar (60psi) |
| Connections: |
1/2" BSP male thread |
| Accessories (not included) : |
Hose fitting kit (t-piece and hosetails to connect
the accumulator to 1/2" hose)
Mounting brackets available |
|
|
|
|
 |
| 8 Litre Accumulator |
| Dimensions: |
330mm high, 205mm diameter (weight 3.2kg) |
|
| Max working pressure : |
4 bar (60psi) |
| Connections: |
3/4" BSP male thread |
| Accessories (not included) : |
Hose fitting kit (t-piece and hosetails to connect
the accumulator to 1/2" hose)
Mounting brackets available |
|
|
|
|
|
|
|
|
|
|
| Back to Top |
| |
We stock the two types of solution below, but can obtain Attwood bilge boxes and Whale gulper pumps upon request. |
 |
| 12v Jabsco Par-Max 3 shower & bath drain pump |
| Suitable for: |
Draining a shower tray (continuous running), draining a bath |
| Type of pump: |
12v switched (self priming upto 2m) |
| Rating: |
13 litres per minute |
| Connections: |
3/4" hosetails |
| Accessories included: |
Hose tail connectors and in-line filter |
|
|
|
 |
| 12v Rule 500 Shower drain box |
| Suitable for: |
Draining a shower tray or bath |
| Dimensions: |
210mm x 285mm x 140mm high |
| Type of pump: |
12v Rule500 bilge pump and float switch |
| Rating: |
32 litres per minute |
| Connections: |
3/4" hosetail outlet, 1.5" hosetail inlet |
|
|
|
|
|
| Back to Top |
|
|
At Ely Boat Chandlers we hold a wide range of pumps and are always happy to advise which model would best suit your application. |
 |
| 12V Rule 360 Bilge Pump |
| Operation: |
Can be switched or used in conjunction with a float switch |
|
| Rating: |
360 gallons per hour |
| Connections: |
3/4" hosetail |
|
|
|
 |
| 12V Rule 500 Bilge Pump |
| Operation: |
Can be switched or used in conjunction with a float switch |
|
| Rating: |
500 gallons per hour |
| Connections: |
3/4" hosetail |
|
|
|
 |
| 12v Rule Float Switch (for use with Rule 12v bilge pumps) |
| When the float rises (with the water level) it completes the circuit and switches the bilge pump on. When the pump reduces the water level the float drops, the circuit is broken and the pump stops. |
|
|
|
 |
| 12V Rulemate 500 Bilge Pump |
| Operation: |
This pump has an internal float switch that turns the pump on and off as the water level rises or falls respectively |
|
| Rating: |
500 gallons per hour |
| Connections: |
3/4" hosetail |
|
|
|
 |
| 12V Plastimo Bilge Pump (small) |
| Operation: |
Can be switched or used in conjunction with a float switch |
|
| Rating: |
1300 litres per hour |
| Connections: |
3/4" hosetail |
|
|
|
 |
| 12V Plastimo Bilge Pump (large) |
| Operation: |
Can be switched or used in conjunction with a float switch |
|
| Rating: |
4000 litres per hour |
| Connections: |
28mm approx 1" hosetail |
|
|
|
|
| Back to Top |
|
|
At Ely Boat Chandlers we hold a wide range of pumps and are always happy to advise which model would best suit your application. |
 |
| Whale "Easy Bailer" |
| Operation: |
manual |
|
| Connections: |
1" Hosetails |
This pump is supplied with a 1m length of hose than can be attached to the inlet or outlet, allowing use in awkward hard to reach places. |
|
|
 |
| Whale "Gusher Urchin " |
| Pump type: |
Diaphragm |
|
| Operation: |
manual |
| Connections: |
Dual 1" and 1.5" hosetail design |
Nitrile diaphragm kits are available for the pumping of diesel and oil |
|
|
 |
| Whale "Gusher Titan" |
| Pump type: |
Diaphragm |
|
| Operation: |
manual (handle is detachable) |
| Connections: |
1.5" hosetail |
A number of our customers use these as manual pump-out pumps
Nitrile diaphragm kits are available for the pumping of diesel and oil |
|
|
| Back to Top |
|
| Miscellaneous Pumps & Syphons |
|
|
| At Ely Boat Chandlers we hold a wide range of pumps and are always happy to advise which model would best suit your application. |
 |
12v LVM "Amazon" Portable pumping kit
(washdown or water or diesel transfer) |
| Type of pump: |
12v Electric (4.5a current) |
|
| Rating: |
18 litres per minute |
| Connections: |
Insulated crocodile clips onto battery
Submerse pump or 1/2" hosetail inlet
4m hose and hose end outlet. |
|
|
|
 |
Tempo Universal Hand Pump Kit
(Suitable for use with oil or water) |
| Operation: |
manual |
|
| Connections: |
1/2" hosetail outlet
Multiple inlet options |
This pump is supplied with a 1/2" diameter pipe for the outlet, a 1/4" dia by 48" long dipstick tube, a 5/16" dia by 48" long dipstick tube and associated fittings needed to use them. |
|
|
 |
Brass and Neoprene Sump Pump
A brass bodied pump for removing oil from engine sumps |
| Operation: |
manual |
| Connections: |
Supplied with an inlet and outlet tube |
|
|
|
|
|
 |
| 12V Oil Changer |
| Connections: |
Insulated crocodile clips onto battery
3 different sizes and materials of inlet tube
Clear plastic outlet tube |
|
This great value oil changer comes with a number of tube options to aid access into your engines dipstick receiver tube / hole.
Please read instruction for the use of this product before use to ensure it performs correctly and efficiently |
|
|
 |
| Liquifix Syphon |
| Contents: |
A 2m flexible hose with patented copper suction head. |
|
| Operation: |
Manual (shake by hand to start) |
|
|
|
 |
| Manual Transfer Pump |
| Pump Type: |
Manual |
|
This is a lightweight plastic pump that’s great for transfer of small volumes of liquids in a clean and safe manner. |
|
|
|
| Back to Top |
|
|
|
|
|
